Setup your secrets in Azure

In this setup we integrate the secrets exercise with Azure AKS and let pods consume secrets from an Azure Key Vault. If you want to know more about integrating secrets with AKS, check this link. Please make sure that the account in which you run this exercise has either Log Analytics enabled, or is not linked to your current subscriptions and/or DTAP environment.

Pre-requisites

Have the following tools installed:

• az CLI - Installation
• Tfenv (Optional) - Installation
• Terraform CLI - Installation
• Wget - Installation
• Helm Installation
• Kubectl Installation
• jq Installation

Make sure you have an active subscription at Azure for which you have configured the credentials on the system where you will execute the steps below.

Please note that this setup relies on bash scripts that have been tested in MacOS and Linux. We have no intention of supporting vanilla Windows at the moment.

Installation

Note-I: We create resources in east us by default. You can set the region by editing terraform.tfvars.

Note-II: The cluster you create has its access bound to the public IP of the creator. In other words: the cluster you create with this code has its access bound to your public IP-address if you apply it locally.

(Optional) Multi-user setup: shared state

If you want to host a multi-user setup, you will probably want to share the state file so that everyone can try related challenges. We have provided a starter to easily do so using an Azure storage container.

First, enable the Microsoft.Storage API (if it isn't already) using:

az provider register --namespace Microsoft.Storage

Then, apply the Terraform (optionally add -var="region=YOUR_DESIRED_REGION" to the apply to use a region other than the default East US):

cd shared-state
terraform init
terraform apply

The storage account name should be in the output. Please use that to configure the Terraform backend in main.tf by uncommenting the part on the backend "azurerm".

Note: You'll need to follow the description below for the "existing resource group" i.e., use the data.azurerm_resource_group.default resource.

WrongSecrets

1. Set either a new resource group or use an existing resource group in main.tf (it defaults to the existing OWASP-Projects resource group). Note that you'll need to find/replace references to "data.azurerm_resource_group.default" to "arurerm_resource_group.default" if you want to create a new one.
2. check whether you have the right project by doing az account show (after az login). Want to set the project as your default? Use az account set --subscription <.id here>.
3. If not yet enabled, register the required services for the subscription, run:
   • az provider register --namespace Microsoft.ContainerService
   • az provider register --namespace Microsoft.KeyVault
   • az provider register --namespace Microsoft.ManagedIdentity
4. Run terraform init (if required, use tfenv to select TF 0.14.0 or higher )
5. Run terraform plan to see what will be created (optional).
6. Run terraform apply. Note: the apply will take 5 to 20 minutes depending on the speed of the Azure backplane.
7. Run ./k8s-vault-azure-start.sh. Your kubeconfig file will automatically be updated.
8. (Optional) To make the app available over a load balancer, run kubectl apply -f ./k8s/lb.yml, then look for the public IP using kubectl describe service wrongsecrets-lb. The app should be available on HTTP port 80 within a few minutes.

Your AKS cluster should be visible in your resource group. Want a different region? You can modify terraform.tfvars or input it directly using the region variable in plan/apply.

Are you done playing? Please run terraform destroy twice to clean up.

Test it

Run ./k8s-vault-azure-start.sh and connect to http://localhost:8080 when it's ready to accept connections (you'll read the line Forwarding from 127.0.0.1:8080 -> 8080 in your console). Now challenge 9 and 10 should be available as well.

Resume it

When you stopped the k8s-vault-azure-start.sh script and want to resume the port forward run: k8s-vault-azure-resume.sh. This is because if you run the start script again it will replace the secret in the vault and not update the secret-challenge application with the new secret.

Clean it up

When you're done:

1. Kill the port forward.
2. Run terraform destroy to clean up the infrastructure. Note that you may need to repeat the destroy to fully clean up.
3. If you've used the shared state, cd to the shared-state folder and run terraform destroy there too.
4. Run rm terraform.tf* to remove local state files.

A few things to consider

1. Does your worker node now have access as well?
2. Can you easily obtain the AKS managed identity of the Node?
3. Can you get the secrets in the Key vault? Which paths do you see?

Terraform documentation

The documentation below is auto-generated to give insight on what's created via Terraform.

Requirements

Name	Version
terraform	~> 1.1
azurerm	~> 3.58.0
http	~> 3.3.0
random	~> 3.5.1

Providers

Name	Version
azurerm	3.58.0
http	3.3.0
random	3.5.1

Modules

No modules.

Resources

Name	Type
azurerm_key_vault.vault	resource
azurerm_key_vault_access_policy.extra_identity_access	resource
azurerm_key_vault_access_policy.identity_access	resource
azurerm_key_vault_access_policy.user	resource
azurerm_key_vault_secret.wrongsecret_1	resource
azurerm_key_vault_secret.wrongsecret_2	resource
azurerm_key_vault_secret.wrongsecret_3	resource
azurerm_kubernetes_cluster.cluster	resource
azurerm_resource_group.default	resource
azurerm_role_assignment.aks_extra_identity_operator	resource
azurerm_role_assignment.aks_identity_operator	resource
azurerm_role_assignment.aks_vm_contributor	resource
azurerm_user_assigned_identity.aks_extra_pod_identity	resource
azurerm_user_assigned_identity.aks_pod_identity	resource
random_integer.suffix	resource
random_password.password	resource
random_string.suffix	resource
azurerm_client_config.current	data source
http_http.ip	data source

Inputs

Name	Description	Type	Default	Required
cluster_name	The AKS cluster name	string	"wrongsecrets-exercise-cluster"	no
cluster_version	The AKS cluster version to use	string	"1.25"	no
region	The Azure region to use	string	"East US"	no

Outputs

Name	Description
aad_extra_pod_identity_client_id	Client ID for the Managed Identity for AAD Pod Identity
aad_extra_pod_identity_resource_id	Resource ID for the Managed Identity for AAD Pod Identity
aad_pod_identity_client_id	Client ID for the Managed Identity for AAD Pod Identity
aad_pod_identity_resource_id	Resource ID for the Managed Identity for AAD Pod Identity
cluster_name	AKS Cluster name
key_vault_url	Azure KeyVault URI for the Demo Container
resource_group	Resource group name
tenant_id	Azure tenant ID
vault_name	Vault name
vault_uri	Vault URI