gopls correctly pointed out that the err==nil check was never met,
as err was assigned and we returned early when err!=nil.
This was an oversight when I wrote this; when Encode fails,
we shouldn't return, because we still want to close the file.
We don't defer because we want to check the error; explain that.
Keeping the original lexical sorting of Go packages would be very hard,
as a Go program may import an unknown number of Go packages,
and we load and obfuscate one package at a time by design.
One option would be to load all packages upfront when obfuscating
main packages, but that would break the per-package caching of
ofbuscated Go packages, causing a huge slow-down in builds.
Another option would be to not obfuscate import paths,
which would clearly cause a worsening of the obfuscation quality.
The third option is to not attempt to keep the original order,
and document that as a caveat in the README.
I suspect the vast majority of Go projects won't be affected by this,
and those few that might be can always use imports to enforce the order.
Closes #693, per the decision above to not change what we do.
Right now, we only have linker patches for Go 1.22.x.
We only ever maintain those for one or two major Go versions at a time.
If a user tries to use the Go toolchain from 1.21, we already fail
with "Go version too old" messages early on, but we don't for 1.23,
causing a relatively confusing error later on when we link a binary:
cannot get modified linker: cannot retrieve linker patches: open patches/go1.23: file does not exist
Instead, fail early and with a good error message.
Panicking in small helpers or in funcs that don't return error
has proved useful to keep code easier to maintain,
particularly for cases that should typically never happen.
However, in these cases we can error just as easily.
In particular, I was getting a panic whenever I forgot
that I was running garble with Go master (1.23), which is over the top.
When updating Garble to support Go 1.22.0, CI on MacOS spotted
that the syscall package was failing to build given that it uses
assembly code which is only allowed in some std packages.
That allowlist is based on import paths, and we were obfuscating
the syscall package's import path, so that was breaking GOOS=darwin.
As a fix, I added syscall to runtimeAndDeps to not obfuscate it.
That wasn't a great fix; it's not part of runtime and its dependencies,
and there's no reason we should avoid obfuscating the package contents.
Not obfuscating the contents in fact broke x/sys/unix,
as it contains a copy of syscall.Rlimit which it type converted with.
Undo that fix and reinstate the gogarble.txtar syscall test.
Implement the fix where we only leave syscall's import path alone.
Add a regression test, and add a note about adding x/net and x/sys
to check-third-party.sh so that we can catch these bugs earlier.
Fixes #830.
When updating Garble to support Go 1.22.0, CI on MacOS spotted
that the syscall package was failing to build given that it uses
assembly code which is only allowed in some std packages.
That allowlist is based on import paths, and we were obfuscating
the syscall package's import path, so that was breaking GOOS=darwin.
As a fix, I added syscall to runtimeAndDeps to not obfuscate it.
That wasn't a great fix; it's not part of runtime and its dependencies,
and there's no reason we should avoid obfuscating the package contents.
Not obfuscating the contents in fact broke x/sys/unix,
as it contains a copy of syscall.Rlimit which it type converted with.
Undo that fix and reinstate the gogarble.txtar syscall test.
Implement the fix where we only leave syscall's import path alone.
Add a regression test, and add a note about adding x/net and x/sys
to check-third-party.sh so that we can catch these bugs earlier.
Fixes #830.
We no longer need to worry about the scope of range variables,
we can iterate over integers directly, and we can use cmp.Or too.
I haven't paid close attention to using these everywhere.
This is mainly testing out the new features where I saw some benefit.
The trash block generator docs aren't ready yet, they will come soon.
This is not a release blocker, given that the control flow obfuscator
is experimental and opt-in for now.
It seems like building with Go 1.22.0 for GOOS=darwin started
running into some issues with the syscall package's use of ABIInternal
in assembly source code:
> exec garble build
[stderr]
# syscall
[...].s:16: ABI selector only permitted when compiling runtime, reference was to "runtime.entersyscall"
The error can be reproduced from another platform like GOOS=linux
as long as we have any test that cross-compiles std to GOOS=darwin.
We had crossbuild.txtar which only ensured we covered GOOS=windows
and GOOS=linux, so add a third case to ensure MacOS is covered too.
This will slow down the tests a bit, but is important for the sake
of ensuring that we catch these bugs early, even without MacOS on CI.
In fact, we hadn't caught this earlier for Go 1.22 precisely because
on CI we only tested on Go tip with GOOS=linux, for the sake of speed.
Adding the rest of the package import paths from objabi.allowAsmABIPkgs
to our runtimeAndDeps generated map solves this error.
add trash block generator
For making static code analysis even more difficult, added feature for
generating trash blocks that will never be executed. In combination
with control flow flattening makes it hard to separate trash code from
the real one, plus it causes a large number of trash references to
different methods.
Trash blocks contain 2 types of statements:
1. Function/method call with writing the results into local variables
and passing them to other calls
2. Shuffling or assigning random values to local variables
That is, the assembly line
#include "foo.h" // bar
would make garble run into an error, as we would try to parse
the #include directive before we stripped comments,
effectively trying to unquote the string
"foo.h" // bar
rather than just the included filename
"foo.h"
Add test cases for asm but also cgo, while at it.
Fixes #812.
In early December, a new internal package linknamed from runtime
was introduced, internal/chacha8rand. Re-generate the tables.
Note that due to the same group of CLs and refactors,
math/rand and net are no longer linknamed from runtime in Go 1.22.
They are still in Go 1.21, so keep those entries around for now.
We can remove math/rand/v2, as it doesn't yet exist in 1.21.
Fixes #820.
In some cases, compiler could optimize the shuffle obfuscator,
causing exposing the obfuscated literal.
As a fix, added xor encryption of array indexes.
This type of question has popped up a number of times before,
particularly when someone unfamiliar with obfuscators in other languages
first hears about the existence of one for Go.
The Go 1.21 linker patches luckily rebased on master as of
de5b418bea70aaf27de1f47e9b5813940d1e15a4 just fine.
The addition of the strings import in the second patch was removed,
since the file in Go 1.22 now has this package import.
We can remove the Go 1.20 linker patches too, since we no longer support
that Go version in the upcoming release.
Start treating runtime/internal/startlinetest as part of the runtime,
since otherwise its test-only trickery breaks "garble build std":
# runtime/internal/startlinetest
[...]/XS7r7lPHkTG.s:23: ABI selector only permitted when compiling runtime, reference was to "HGoWHDsKwh.AlfA2or7Nnb"
asm: assembly of $WORK/.tmp/garble-shared1535203339/HGoWHDsKwh/XS7r7lPHkTG.s failed
While here, update actions/checkout and staticcheck in CI.
TypeName.Pkg is documented as:
Pkg returns the package to which the object belongs.
The result is nil for labels and objects in the Universe scope.
When a struct type embeds a builtin alias type, such as byte,
this would lead to a panic since we assumed we could use the Pkg method.
Fixes #798.
This was a long standing TODO, and a user finally ran into it.
The fix isn't terribly straightforward, but I'm pretty happy with it.
Add a test case where the same struct field is identical
with no tag, with the "tagged1" json tag, and again with "tagged2".
While here, we add a test case for a regular named field too.
Fixes #801.
Go 1.21.0 was released in August 2023, so our upcoming release
will no longer support the Go 1.20 release series.
The first Go 1.22 release candidate is also due in December 2023,
less than a month from now, so dropping 1.20 will simplify 1.22 work.
Two new packages linknamed with the runtime package,
one new intrinsic function, and one that is being removed in Go 1.22
but we want to keep around as long as we support Go 1.21.
Also note that, since math/rand/v2 simply does not exist until Go 1.22,
we need to adjust appendListedPackages to not fail on older versions.
Otherwise we have to update that `@semver` string
alongside the regular x/tools updates in go.mod.
There's no reason to separate the two versions either.
Without hardening, obfuscation is vulnerable to analysis via symbolic
execution because all keys are opened, and it is easy to trace their
connections. Added extendable (contribution-friendly) hardening
mechanism that makes it harder to determine relationship between key and
execution block through key obfuscation.
There are 2 hardeners implemented and both are compatible with literal
obfuscation, which can make analysis even more difficult.
We were using an alphabet with a duplicate character on purpose.
Go 1.21 was perfectly fine with that, but 1.22 started noticing:
panic: encoding alphabet includes duplicate symbols
I can't fault the new sanity check, because it makes sense in general.
What we are doing here is slightly bizarre, because we don't care
about decoding the name hashes at all.
Appease the sanity check by replacing dashes with duplicate characters
as a follow-up step. While here, use "a" rather than "z",
which is more common and less likely to be noticeable.
On my laptop, `go test -short -race` on Go 1.20 used to take about 62s.
Jumping to Go 1.21, I was surprised to see an increase to 152s,
more than double - which was weird given how often the CPU was idle.
This manifested when updating our CI to start testing on Go 1.21.
Where Go 1.20 on Linux took about 10m to run `go test -race`,
Go 1.21 hit the 20m timeout every single time.
After a bit of googling, I was reminded of https://go.dev/issues/20364
as well as https://go.dev/doc/articles/race_detector#Options:
atexit_sleep_ms (default 1000): Amount of milliseconds to sleep in the main goroutine before exiting.
This default is a bit aggressive for Go, but usually harmless,
having each test binary sleep for 1s after the package has been tested.
However, this 1s sleep after main runs is horrendous for garble's tests;
the testscripts run `garble build` many times, running the test binary.
It then runs `go build -toolexec=garble`, which runs the test binary
many more times: for every compiler, linker, etc invocation.
This means that our testscripts would include dozens of 1s sleeps,
in many cases blocking the continuation of the entire test.
This seemed to not be happening on earlier Go versions due to a bug;
Go 1.21's race mode started obeying this default properly.
The added change sets atexit_sleep_ms to something more reasonable
if GORACE isn't set at all; 10ms doesn't disable this check entirely,
but its overhead is orders of magnitude less noticeable than 1000ms.
`go test -short -race` on Go 1.21 drops back down to 68s for me.
STRLCPY committed 1 month ago
Daniel Martí committed with Paul Scheduikat 5 months ago
Daniel Martí committed with pagran 6 months ago
Daniel Martí committed with lu4p 12 months ago