| skipped 129 lines |
130 | 130 | | |
131 | 131 | | ![ESP32](https://github.com/joelsernamoreno/EvilCrow-Keylogger/blob/master/images/esp32.PNG) |
132 | 132 | | |
133 | | - | * 0.- Wire the Keylogger with Arduino using the following pinout: |
134 | | - | |
| 133 | + | 1. Wire the Keylogger with Arduino using the following pinout: |
135 | 134 | | ![Flash](https://github.com/joelsernamoreno/EvilCrow-Keylogger/blob/master/images/esp32-flash.PNG) |
136 | | - | |
137 | 135 | | ![Wire](https://github.com/joelsernamoreno/EvilCrow-Keylogger/blob/master/images/wire.jpg) |
138 | | - | |
139 | | - | * 1.- Open Arduino IDE. |
140 | | - | |
141 | | - | * 2.- Open the ESP32.ino sketch. |
142 | | - | |
143 | | - | * 3.- Select Tools - Board - "ESP32 Dev Module". |
144 | | - | |
145 | | - | * 4.- Connecting the Arduino device to the computer. |
146 | | - | |
147 | | - | * 5.- Upload the code to the board. |
| 136 | + | 1. Open Arduino IDE. |
| 137 | + | 1. Open the ESP32.ino sketch. |
| 138 | + | 1. Select Tools |
| 139 | + | * Board - "ESP32 Dev Module". |
| 140 | + | * Flash Size - "4MB (32Mb)". |
| 141 | + | * CPU Frequency - "80MHz". |
| 142 | + | 1. Connecting the Arduino device to the computer. |
| 143 | + | 1. Upload the code to the board. |
148 | 144 | | |
149 | 145 | | ### Upload atmega32u4 code |
150 | 146 | | |
| skipped 54 lines |